Cisco Meraki (syslog)

Configure the Cisco Meraki syslog data connector.

In this guide, you'll configure Cisco Meraki to integrate with Radiant Security. Cisco Meraki is a cloud-managed networking solution that provides centralized management across locations, infrastructure, and connected devices.

Prerequisites

• Admin access to the Cisco Meraki Dashboard

Add the data connector in Radiant Security

1. Log in to Radiant Security.

2. From the navigation menu, click Settings > Data Connectors and click + Add Connector.

3. Search for and select the Cisco Meraki option and then click Data Feeds.

4. Under Select your data feeds, select Cisco Meraki and click Credentials.

5. Under Credential Name, give the credential an identifiable name (e.g. Cisco Meraki Credentials).

6. Under Required Credentials, in the Connector tag field enter a value. This value will act as the salt to randomize the unique Token you’ll download in the next step.

7. Click Add Connector.

8. Copy and save the connector Token value using the clipboard option or download the Token file. You will need this token to complete the configuration.

9. Click Done to save your changes.

Configure a local Radiant Security Agent

Refer to the Install the Radiant Security Agent guide to set up a local agent to collect the logs.

Configure Cisco Meraki to forward logs to the Radiant Security Log Collector

1. Log into Cisco Meraki Dashboard.

2. Navigate to Network-Wide > Configure > General.

3. On the Reporting section, click Add a syslog server.

4. Enter the Server IP and Port of the Radiant Security Syslog Collector.

   
5. On Roles, select URL, Flows and Security Events.

6. Navigate to Security & SD-WAN > Configure > Firewall.

7. Under Logging, from the drop-down to select Enabled for each firewall rule to allow the device to register the network connections.